Cyclops Remote Alarm Deluxe Cyclops Remote Alarm Deluxe

This multi Australian Standards approved immobiliser alarm provides two circuits of engine immobilisation operated by rolling code random encrypted remote control. Entry point protection of doors, boot and bonnet with an intelligent glass break sensor. Audible warning is achieved via a 115dB Australian Standards battery back up siren, visually via the vehicle indicators and via a dash mounted high intensity red LED. The system may provide keyless entry.

Proudly Australian - Designed and engineered in Perth, Western Australia.


  Operation
  • Arming procedure while ignition is off
     The system will arm immediately if the main button of a valid remote control is momentarily pressed, the doors will lock and all security functions will become active May require additional hardware or connections..
  • Disarming procedure
     The system will disarm when the main button of a valid remote control is pressed.
  • Auto Arming feature
     The immobiliser will automatically immobilise the engine 39 seconds after the engine has stopped, if the vehicle is left untouched.
  Immobilisation
  • Two independent circuits of immobilisation
    30 Amp rated, normally open contacts.
  • Automatic immobilisation
    39 seconds after ignition switch is turned off.
  • Safety circuitry incase of power failure
    System sources alternate power from ignition if main power is lost.
  • Third circuit of immobilisation (optional)
    Additional immobilisation circuits can be added to conform with insurance company requirements Special order required - this is not part of the standard hardware..
  On-board relays
  • Protection against harsh road conditions
    All relays are fully encapsulated to provide protection against dust and moisture.
  Controllers
  • Two polycarbonate remote controls
     Rolling code encoder with over 18,000,000,000,000,000,000+ code combinations, transmitting via 433MHz PWM RF signal.
  • Controller Type
     Uses two black ABS plastic remote controls with long life Lithium batteries.
  • Large system memory
     Allows system to track three controllers.
  • Controller re-programming
     Service technician can delete lost or stolen controllers from memory.
  • Compatible Remotes
     This system comes standard with REM-015, but is compatible with REM-014,.
  • Remote battery life
     Two CR2016 Lithium batteries have a expected average life span of between 9 and 18 months (depending on usage). Battery manufacturer may vary due to availability of stock. See the GP battery manufacturer website.
  Wiring
  • Security wiring
     All cables extending from the module are black and same diameter.
  • Plug and play for service
     Designed to allow easy access for service technicians.
  • Security housing
     Connector plug is enclosed within module case to prevent access by thief.
  • Stealth wiring
     Cutting any immobilisation wiring will still leave the car secure.
  Override
  • Emergency Personal Identification Number override
     Enter the secret four digits to override the immobiliser Feature is a programmable option.
  • Alterable PIN
     Users can change the numbers of their secret override PIN Feature is a programmable option.
  • One shot override
     Immobiliser always re-arms to protect vehicle, re-enter PIN if vehicle needs to be driven after auto-arming has occurred.
  • High security keys and lock
     Disable siren sound when vehicle is taken in for service.
  • PIN card
     Secret override PIN is supplied on handy 90mm x 50mm card.
  Visual Output
  • Super bright red dash LED
     This LED flashes to inform user when system is armed. The LED is mounted on the driver's side dash and is visible from outside the window.
  • Arm/Disarm confirmation
    System flashes car indicators when arming or disarming.
  • Alarm illumination
    System flashes car indicators when thief triggers alarm.
  Audio Output
  • Large battery backup siren
    AS/NZS 3749.1:2003 Class A approved 115dB siren, sounds even if battery terminals are disconnected from vehicle battery.
  • Negative siren output
     Can be used to trigger car horn relay or siren.
  • Arm/Disarm confirmation
     System sounds a siren when arming and disarming Feature is a programmable option.
  • Temporary arm/disarm chirp disable
     Momentarily press the second button of the remote control before pressing the main button, the siren will not chirp during that one operation.
  Intrusion Detection
  • Doors, bonnet and boot monitoring
     Triggers alarm system if intruder opens any protected entry point in vehicle May require additional hardware or connections.
  • Audio glass breakage detection
     Uses the sound of the breaking glass to trigger (not vibration) Will categorically need extra hardware and connections GBS-4XR.
  • Accepts plug-in Ultra-sonic sensor
     Sensor produces a 40KHz sound wave and measures echo to detect intruder, Will categorically need extra hardware and connections ACC-001.
  • Accepts plug-in single zone microwave sensor
     Sensor produces a microwave field to detect intruder, Will categorically need extra hardware and connections ACC-003.
  • Accepts plug-in dual zone microwave sensor
     Sensor produces two microwave fields, exterior field to sound siren as warning, interior to trigger alarm in full, Will categorically need extra hardware and connections ACC-004.
  • Accepts plug-in single stage shock sensor
     Sensor measures vibration subjected to vehicle to detect intruder, Will categorically need extra hardware and connections SEN-002.
  • Accepts plug-in two stage shock sensor
     Sensor measures two levels of shock, soft shock to sound siren as warning, heavy shock to trigger alarm in full, Will categorically need extra hardware and connections SEN-006.
  • Compatible with tilt sensor
     Sensor measures vehicle angle with respect to earth, triggers if angle changes - no response to vibration Will categorically need extra hardware and connections SEN-004.
  Central Locking
  • Locks and unlocks all doors
    System can trigger factory central locking, aftermarket central locking or central locking relays Will categorically need extra hardware and connections.
  • Variable pulse time
     Extend pulse length to drive pneumatic central locking systems (Mercedes) Feature is a programmable option.
  • Automatic re-locking
     System will re-arm and re-lock doors if previously disarmed by remote control and doors remain closed May require additional hardware or connections Feature is a programmable option.
  • Anti-hijacking protection
     System locks doors when ignition is turned on, unlocks when ignition is turned off May require additional hardware or connections Feature is a programmable option.
  • Dual stage unlock
     Allows user to unlock driver's door before unlocking all other doors Will categorically need extra hardware and connections.
  Specifications
  • Current draw
    <10mA average while armed
    <250mA disarm (and for no more than 39 seconds after ignition is switched off).
  • Operating voltage
    Operating voltage +9VDC to +15VDC.
  • Operating temperature
     -20 degrees to +85 degrees for equipment designed to be installed within vehicle cabin.
  • Polarity protection
     Accidentally reversing the battery leads will not damage the system.
  • Independent indicator power fuse
     System uses independent fuse to power indicators, ensures short circuit in indicator circuit does not affect system operation.
  • Short circuit protection
     Fuse protected in case any high power wiring is sheared through and shorted circuited.
  Convenience Functions
  • Panic / Car Finder
     Press and hold second button of remote control to cause horn to sound and indicators to flash May require additional hardware or connections.
  • Electric window closer
     Provides signals used by electric window closers, system will close all electric windows when armed by remote control Will categorically need extra hardware and connections.
  • Courtesy light switch activation
     System switches courtesy light on for 30 seconds or until ignition switch is turned on, when disarmed Will categorically need extra hardware and connections Feature is a programmable option.
  • Electronic boot release
     Press and hold the secondary remote control button, while system is disarmed, to activate boot release output. The indicators will flash four time each time the boot release signal is sent Additional relay and connection required in vehicles with boot solenoid. Relay and solenoid kit required for vehicle without solenoid.
  Printed Material
  • Installation Guide
     Complete installation guide and specifications for the alarm/immobiliser system.
  • User Guide
     Informs the end-user of the system's functions, features and limitations. Open - User guide.
  Warranty
  • Manufacturers warranty on Control module
     Guarantees control module is free from manufacturing defects for 24 months from time of purchase Conditions apply.
  • Manufacturers warranty on Sundry items
     Guarantees remote controls, siren and sundry items are free from manufacturing defects for 12 months from time of purchase Conditions apply.
  Standards Compliance
  • Australian Standard for vehicle Immobilisers
     AS/NZS 4601:1999 - Australian Standards website.
  • Australian Standard for Intruder alarm systems - Road vehicles - Performance requirements
    AS/NZS 3749.1:1997 - Australian Standards website.
  • Australian Standard for Intruder alarm systems - Road vehicles - Performance requirements
    AS/NZS 3749.1:2003 Class A - Australian Standards website.
  • Manufactured in ISO9001 facility
     Built within world standard production facility.
  • AS/NZS 4601 sundry standards of compliance (or parts thereof)
    AS1939 - Degrees of protection provided by enclosures for electrical equipment (IP Codes)
    AS3300 - Approval and test specification - General requirements for household and similar electrical appliances
    AS/NZS3548 Limits and methods of measurement of radio disturbance characteristics of information technology equipment
    AS/NZS3749 - Intruder alarm systems - Road vehicles
    AS/NZS4268 - Radio equipment and systems - Short range devices
    AS/NZS61000 - Electromagnetic compatibility (EMC)
    NZS6300 - Approval and test specification - General requirements for household and similar electrical appliances
    ISO7637 - Road vehicles - Electrical disturbance by conduction and coupling
    IEC61000 - Electromagnetic compatibility (EMC)
    ASTM B117 - Standard practice for operating salt spray (fog) apparatus.
  • AS/NZS 3749 sundry standards of compliance (or parts thereof)
    AS1217 - Acoustics - Determination of sound power levels of noise sources
    AS1259 - Acoustics - Sound level meters
    AS1939 - Degrees of protection provided by enclosures for electrical equipment (IP Code)
    AS3350 - Safety of household and similar electrical appliances
    AS4268 - Radio equipment and systems - Short range devices
    AS/NZS3749 - Intruder alarm systems - Road vehicles
    AS/NZS61000 - Electromagnetic compatibility (EMC)
    CISPR 22 - Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
    ASTM B117 - Standard practice for operating salt spray (fog) apparatus
    ISO512 - Road vehicles - Sound signalling devices - Technical specifications
    ISO7637 - Road vehicles - Electrical disturbance by conduction and coupling
    IEC61000 - Electromagnetic compatibility (EMC).

NOTES LEGEND:
Will categorically need extra hardware and connections Will categorically need extra hardware and connections.
May require additional hardware or connections May require additional hardware or connections.
Additional relay and connection required in vehicles with boot solenoid. Relay and solenoid kit required for vehicle without solenoid Additional relay and connection required in vehicles with boot solenoid. Relay and solenoid kit required for vehicle without solenoid.
Vehicle circuit polarity may require addition components to convert voltage Vehicle circuit polarity may require addition components to convert voltage.
Special order required - this is not part of the standard hardware Special order required - this is not part of the standard hardware.
Special feature out of Dynamco's control Special feature out of Dynamco's control.
Conditions apply Conditions apply.
Feature is a programmable option Feature is a programmable option.
© Copyright 2007 Cyclops