Cyclops Touchkey Immobiliser Cyclops Touchkey Immobiliser

This Australian Standards approved immobiliser provides two circuits of automatic engine immobilisation operated by an electronically coded touch key making contact with a dash mounted receptacle incorporating a warning light.

Proudly Australian - Designed and engineered in Perth, Western Australia.


  Operation
  • Disarming procedure
    Insert and remove Touch-key from receptacle on dash to disarm immobiliser.
  • Auto Arming feature
    The immobiliser will automatically immobilise the engine 39 seconds after the engine has stopped, if the vehicle is left untouched.
  Immobilisation
  • Two independent circuits of immobilisation
    30 Amp rated, normally open contacts.
  • Automatic immobilisation
    39 seconds after ignition switch is turned off.
  • Safety circuitry incase of power failure
    System sources alternate power from ignition if main power is lost.
  • Third circuit of immobilisation (optional)
    Additional immobilisation circuits can be added to conform with insurance company requirements Special order required - this is not part of the standard hardware..
  On-board relays
  • Protection against harsh road conditions
    All relays are fully encapsulated to provide protection against dust and moisture.
  Controllers
  • Two Touch key tags
     Encoded digital signature device with 281,000,000,000,000+ code combinations.
  • Large system memory
     Allows system to track four controllers.
  • Controller re-programming
     Service technician can delete lost or stolen controllers from memory.
  Wiring
  • Security wiring
     All cables extending from the module are black and same diameter.
  • Plug and play for service
     Designed to allow easy access for service technicians.
  • Security housing
     Connector plug is enclosed within module case to prevent access by thief.
  • Stealth wiring
     Cutting any immobilisation wiring will still leave the car secure.
  Override
  • Emergency Personal Identification Number override
     Enter the secret four digits to override the immobiliser Feature is a programmable option.
  • Alterable PIN
     Users can change the numbers of their secret override PIN Feature is a programmable option.
  • One shot override
     Immobiliser always re-arms to protect vehicle, re-enter PIN if vehicle needs to be driven after auto-arming has occurred.
  • PIN card
     Secret override PIN is supplied on handy 90mm x 50mm card.
  Visual Output
  • Super bright red dash LED
     This LED flashes to inform user when system is armed. The LED is mounted on the driver's side dash and is visible from outside the window.
  Specifications
  • Current draw
    <10mA average while armed
    <250mA disarm (and for no more than 39 seconds after ignition is switched off).
  • Operating voltage
     Operating voltage +9VDC to +15VDC.
  • Operating temperature
     -20 degrees to +85 degrees for equipment designed to be installed within vehicle cabin.
  • Polarity protection
     Accidentally reversing the battery leads will not damage the system.
  • Short circuit protection
     Fuse protected in case any high power wiring is sheared through and shorted circuited.
  Printed Material
  • User Guide
     Informs the end-user of the system's functions, features and limitations. Open - User guide.
  Warranty
  • Manufacturers warranty on Control module
     Guarantees control module is free from manufacturing defects for 24 months from time of purchase Conditions apply.
  • Manufacturers warranty on Touch-keys
     Guarantees Touch-keys and socket are free from manufacturing defects for 12 months from time of purchase Conditions apply.
  Standards Compliance
  • Australian Standard for vehicle Immobilisers
    AS/NZS 4601:1999 - Australian Standards website.
  • Manufactured in ISO9001 facility
    Built within world standard production facility.
  • AS/NZS 4601 sundry standards of compliance (or parts thereof)
     AS1939 - Degrees of protection provided by enclosures for electrical equipment (IP Codes)
    AS3300 - Approval and test specification - General requirements for household and similar electrical appliances
    AS/NZS3548 Limits and methods of measurement of radio disturbance characteristics of information technology equipment
    AS/NZS3749 - Intruder alarm systems - Road vehicles
    AS/NZS4268 - Radio equipment and systems - Short range devices
    AS/NZS61000 - Electromagnetic compatibility (EMC)
    NZS6300 - Approval and test specification - General requirements for household and similar electrical appliances
    ISO7637 - Road vehicles - Electrical disturbance by conduction and coupling
    IEC61000 - Electromagnetic compatibility (EMC)
    ASTM B117 - Standard practice for operating salt spray (fog) apparatus.

NOTES LEGEND:
Will categorically need extra hardware and connections.
May require additional hardware or connections.
Additional relay and connection required in vehicles with boot solenoid. Relay and solenoid kit required for vehicle without solenoid.
Vehicle circuit polarity may require addition components to convert voltage.
Special order required - this is not part of the standard hardware.
Special feature out of Dynamco's control.
Conditions apply.
Feature is a programmable option.
© Copyright 2007 Cyclops