Cyclops 4CL-002 Standard Central Locking Kit Cyclops 4CL-002 Standard Central Locking Kit

Lock and unlock all doors by operation either front doors. This module uses negative lock and unlock signals from a remote alarms/immobilisers to mechanically operated the lock mechanism of a car door.


  Operation
  • Master and slave actuators
    Each kit uses a master actuator for each front door, and a slave actuator for the rear door (4 in total). Master actuators control all actuators.
  • Full complement of hardware
    Supplied with all metal brackets, superior 3 point fixing clamps with slot / cross head screws, rods, worms, speed nuts and cabling required for standard installation.
  • Intelligent switch controller
    Includes active central locking controller.
  On-board relays
  • Protection against harsh road conditions
    All relays are fully encapsulated to provide protection against dust and moisture.
  Controllers
  • Two polycarbonate remote controls
    Rolling code encoder with over 18,000,000,000,000,000,000+ code combinations, transmitting via 433MHz PWM RF signal.
  • Large system memory
    Allows system to track five controllers.
  • Controller re-programming
    Service technician can delete lost or stolen controllers from memory.
  Wiring
  • Pre-loomed wire harness
    Generous wire loom to connect four doors, all wires fully sheathed.
  Specifications
  • Operating voltage
    Operating voltage +9VDC to +15VDC.
  • Operating temperature
    -20 degrees to +85 degrees for equipment designed to be installed within vehicle cabin.
  • Polarity protection
    Accidentally reversing the battery leads will not damage the system.
  • Short circuit protection
    Fuse protected in case any high power wiring is sheared through and shorted circuited.
  Compatibility
  • Compatible with these systems
    Cyclops range of immobilisers/alarms : P355, P375, P375B, P385, P755, P775, P775B, P785, KE-CLR-TX90, KE-CLR-TX11, S35i, S35B, S35C, S75i, S75B and S75C May require additional hardware or connections.
  Warranty
  • Manufacturers warranty
    Guarantees product is free from manufacturing defects for 12 months from time of purchase Conditions apply.
  Standards Compliance
  • Manufactured in ISO9001 facility
    Built within world standard production facility.

NOTES LEGEND:
Will categorically need extra hardware and connections Will categorically need extra hardware and connections.
May require additional hardware or connections May require additional hardware or connections.
Additional relay and connection required in vehicles with boot solenoid. Relay and solenoid kit required for vehicle without solenoid Additional relay and connection required in vehicles with boot solenoid. Relay and solenoid kit required for vehicle without solenoid.
Vehicle circuit polarity may require addition components to convert voltage Vehicle circuit polarity may require addition components to convert voltage.
Special order required - this is not part of the standard hardware Special order required - this is not part of the standard hardware.
Special feature out of Dynamco's control Special feature out of Dynamco's control.
Conditions apply Conditions apply.
Feature is a programmable option Feature is a programmable option.


© Copyright 2007 Cyclops